Portable 80,000-BTU Propane Powered Convection Heater with 1-Handed Piezo Ignition, 2,000-Square Foot Heating Area

Convection Heater generates 360-degrees of instant heat for construction sites, industrial work spaces, agricultural buildings and other ventilated spaces. Rated at 50,000 – 80,000-BTUs, the RMC-LPC80DG heats a maximum of 2,000-square feet for a period of 15 to 144-hours depending on the BTU level selected and the size of the propane tank. Does not require electricity and can be fueled by a 20, 40, or 100-pound liquid propane (LP) tank (not included). 20-pound tank run time is 9-hours at 50,000-BTUs and 5-hours at 80,000-BTUs. 40-pound tank run time is 17-hours at 50,000-BTUs and 11-hours at 80,000-BTUs. 100-pound tank run time is 43-hours at 50,000-BTUs and 27-hours at 80,000-BTUs. This unit is easy to ignite with a push and turn piezo ignition and it has continuously variable control between low and high setting, for maximum comfort control. Fully portable and easy to transport between sites. Includes an inner wind shield, but also includes a shut-off safety valve that stops gas flow, if the flame is extinguished, keeping the user and the project safe. Measures 15.91-inches (L) by 15.91-inches (W) by 18.5-inches (H) and weighs 11.29-pounds. CSA approved and meets all applicable standards, which cover important safety and quality requirements.

Features:

• Instant portable heat for indoor and outdoor construction sites, industrial work spaces, agricultural buildings and more
• 50,000 – 80,000-BTUs, the RMC-LPC80DG heats up to 2,000-square feet for 15 to 144-hours, depending on BTU level and tank size
• Powered by liquid propane and includes a 10-inch hose and regulator
• Features piezo ignition and continuously variable BTU control and includes hose and regulator
• Includes an inner wind shield and a shut-off safety valve that stops gas flow, if the if the flame is extinguished
• 1-Year Limited Warranty